Originally Posted by sinaSRT-4 (Post 25370)

What's up guys :nuts:. Tyler, I can definitely help you out with the problems quoted above. For the tranny rebuild you will need to contact Joe Dirt on SRT forums since he knows the SRT-4 inside and out and does awesome work at a great price. He is the go to guy for SRT transmission rebuilds. :bigthumbsup: Dropping the clutch and swapping out the clutch/TOB/And clutch release fork is not that difficult but it requires some time which I do not have.

I can also take a look at the leak from your O2 housing to see if we can fix it and do some boost leak testing.

Originally Posted by BlacknBoostn (Post 25461)

#3 is mostly solved. I have to check on a loose/stripped bolt that isn't tightening down right not sure what that'll entail but grind is gone. I needed new pads.. the Pass Side INSIDE pad was at metal, but the Pass side OUTSIDE had about 60% meat left. Couldn't tell without actually taking a look at everything. Got that handled now. It was a really weird wear pattern though... kinda angled and moreso on the inside. I'm keeping my eye on this in a few weeks.

Originally Posted by BlacknBoostn (Post 25205)

Joe, can you help???

Originally Posted by joedls (Post 25515)

I can help with some of this. But I'll tell you right now, I'm not working under your car. I'd rather get beaten. I just paid someone to replace my clutch because I hate it so much.

Let me know. This Saturday, I'm going to the Street Legals.

Originally Posted by BlacknBoostn (Post 25518)

.. Can be arranged... JK Joe!

I'm mostly worried about wiring, I know you did some of the wiring on your car, and I was hoping you might me willing to help me on the wiring for mine lol. I don't have a soldering gun and the guts to cut open my harness. As for being under my car, I'll take care of that haha

I can probably do the clutch with some other help myself, but not for another month or two.

Sean, Saturday I work, no bueno. Maybe sunday? Whatevs. LMK and we'll figure it out.

Joe, GL at the SLs. How're the coilovers?

Originally Posted by BlacknBoostn (Post 25518)

.. Can be arranged... JK Joe!

Originally Posted by joedls (Post 25526)

No problem with the wiring. I have a soldering gun. Let me know what time and where on Sunday. I can come over and take care of that for you. You have shrink tubing and wire loom?

I'll let you know how the coilovers work after Saturday.

Originally Posted by joedls (Post 25527)

Good luck with that.