Aussie Locker
 

So I just picked up a aussie locker for the front of mozes (my 88 trooper)

Nice. Hopefully you have manual hub.

Lol ya i have a set of warn hubs on that truck. I don't understand hub less trucks.

What's the advantage to hubs?

Nice btw!! Gonna do some mudding to celebrate?

I like hubs so i'm now always spinging my diff and transfer case.


And I will once i cant get the damn bearings off!!!

Mocking up the install.



I've always hated how warn hubs where gold.



sitting in the truck waiting for axle shafts.

You never said what you found broke in the front end. Was it a broken axle? Now we just need to modify your springs to improve the ride. Did you turn the shocks over? I have a set of rear Old Man Emu leaf packs that Phil gave me that we can use instead of the add-a-leaf.

Its kind of funny....

I think it was a combination of things. The main problem was that my front drive shaft became disconnected from the transfer case. I also noticed that the ujoint was sieased. The pinion was also very lose and leaking. (about half an inch of in and out play) thank goodness that it was still is great shape.


So I now have a locked front end and 4wd back! (and put a hell of a lot of locktight on eveything!!)

Yes I swapped the shocks I'll plan on getting some new ones in a month or whenever I swap in the newer rear axle and level the truck.

How much would you want for the old man emu packs? Also do you think you could help with the repack of the leafs? Never done it and not 100% on the theory behind it.

I don't want anything for them. Did you measure the rear packs to see if they are 2 3/4 inches wide like the fronts are? I could come over tomorrow and we can modify your packs.

My rear springs are 2 3/8 wide my fronts are 2 5/8 wide. I know my rear are longer then the fronts (47 inches i think.....The internet people say 44 but i don't know if i believe them.)

Sorry, I meant 2 5/8. I can't do it tonight though but how about Thursday night?

That cool. You are the one doing me the huge favor so its on your time.

Do you want to do this tonight?

Tonight works for me. Let me see if I can find some bushings so I can replace those as well.....They dont look easy to come by near by

I'll be there around 5pm.

So did you take it for a test drive yet to see how it rides now?

Much much better.

On road it is about the same as before.

Off road it is like night and day. now i don't fear dirt roads and ruts.

THANK YOU very much RON!

You're welcome. Now get the bushings and inserts, reinforce the front crossmember, install some pinion angle shims and get the Bilsteins. That should cure your bumpsteer issue.

Damn it...you had to remind me of all the stuff I still need to get done....thanks lol

No problem, lol.