1999 Corvette TCS/ABS Issues
In an attempt to get the car ready for a track day I fixed the horrendous oil leaks and detailed the engine bay. That's where everything went south. I used regular soap and very low pressure water. Few hours later getting on the freeway the tires broke loose and now the TCS/ABS error is consistent on the car.
Cleaned all the grounds, removed the EBCM plug, cleaned, applied die electric grease, reinstalled and it cleared up the C1255 code, however I am still showing a hard P1268 and C1276. Any luck it's something stupid or did I just get the dreaded EBCM replacement that no one makes and only the few seem to have? |
I'm assuming you cleared and they reset again? Still happening? If so, that's not good news . . .
|
Yep cleared them, checked all the pinouts, now I have a hard No comm. error when I check the codes, so I guess it's time to grab my ankles and search for an EBCM
|
Quote:
|
Quote:
GM claims to have lost most of the design schematics for the C5 during the bailout. They can't make them new anymore, there are no companies that can reliably re-manufacture them and the early modules are different than the 01+ years. There are a few on ebay ranging from 1200-2200 :/ |
Quote:
Also you might check through my rebuild thread. I think I bought a used one from LKQ, and sent it to a guy who does nothing but rebuild them. It's about as close to OEM as you can get. |
All times are GMT -7. The time now is 10:29 AM. |
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.