Biggest Smog Cam for LS1~
This is related to bringing my LS C3 Corvette back online, however, because it is a very specific cam question, I will ask it in dedicated thread.
QUESTION What IS the largest I can go before I can't pass the sniffer? ASSUMPTION Declared as 2001 F Body 346ci and 11:1~ comp if it matters TARGET Street performance and passing sniffer. HISTORY Mine was advertised as 224/224 114 LSAm .566 lift. My understanding is that this was a common "smog" cam, the biggest you could go before busting the sniffer. I have stock manifolds and OE cats. Despite the cam, heads, LS6 intake, and larger TB I always passed the sniffer by a fair margin. Depending on how things go, I plan to get custom headers including hi-flow cats. |
I'd say you are the limit with an off the shelf cam. The Comp cam I put in the 347 in the Cobra is 212/218 @ .050 on a 114 LSA with a .544 lift and with a brand new 4 cat X-pipe I just passed. I think your only option for more performance from the cam is to get a custom grind.
|
"Big" is relative, you can have a ton of lift with relatively small duration that will make better better power in a street car. Less overlap, more vacuum, no overlap, tons of vacuum.
If you didnt want to spend the money on a custom grind from FTI. I would pick something in the .6XX lift range with around 220 duration depending on the rocker arm ratio. That wiuld make for an extremely snappy street car and power would come on insanely fast. It wont spin to 7500, but it will get to 6500 in a flash |
Cool. I'll take it up with Troy. Something that puts around nice, passes smog, and jumps to 6k~ for peak power of around 430whp when all is said and done is about where I want to be. In a 3,000lbs car with everything else set up good n' proper is going to be plenty fast to be fun, more than I could really use other than romps onto the freeway, the occasional open road, etc.. At some point it becomes pretty pointless in a streetcar. Nothing wrong with that, just I'm not interested in having a mountain of power I won't ever really use.
|
Quote:
|
Quote:
|
Quote:
http://www.flowtechinduction.com/fti...ller-camshaft/ Just the cam Or Choose whatever kit you want for whatever long block you choose. http://www.flowtechinduction.com/fti...shaft-package/ Add in some Morel Lifters and you have a bad ass valvetrain, where the money really needs to be spent anyhow, that will fuckin move. Just tell Ed your intentions, weight, etc and he'll make it happen. |
OTOH, if a custom grind more or less dictates a tune, I'm not ready for that. I'd want to get my exhaust done, and that's gon' be a couple g. Mmm.
|
Quote:
|
I suppose the difference between a custom smoggable street cam and an off the shelf smoggable street cam is not going to be so large as to be dangerous around lean-out conditions where shit melts. The computer can adjust trim based on O2 to some degree. But it already doesn't warm start idle for shit, don't need that to take a dump any further. I'll look into it further once I know the condition of the block and heads.
|
All times are GMT -7. The time now is 03:30 PM. |
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.