Quote:
Originally Posted by 94cobra69ss396
If Joe can remember what the redline was before it would help.
I also don't think there is a need to go through the bottom end with only 5000 miles but it wouldn't hurt to pull a rod and main bearing just to make sure they look good.
|
The engine seemed to quit making power ~ 5500 RPM, but I'm sure that is because it was choked down; stock exhaust manifolds, 2" exhaust, small ports and valves on the heads. I think that shortblock will hold up to about 550 - 600 HP. Much more than that at these blocks start splitting without further work.
I agree that the bottom end doesn't need to be gone through, but checking the bearings would be wise. Won't take much effort.