Quote:
Originally Posted by BRUTAL64
If the 195's as cast are simular to the 185 CNC then they will work fine. The mid lift is not as good as AFRs (no one is really) but this is a "GOOD" head. I'd still like to see a set. Without a flow bench a clean-up (if needed) is the best way to go.
"In head porting, what you don't do is sometimes more inportant that what you do do". Brutal 
If I do Porting 101, you will know enough to understand what entailes a good head.   |
I'll volunteer my BBC Edelbrock Performer RPM rectangular ports for a porting 101 class. I want to port them anyways so if you want to give a demo on port them all the better. I just have to pull them off the car.