I've never waited for it to dry overnight and never had an issue. I think I got a bad tube because it was still wet when I pulled the intake off this morning. I'm glad that it did leak though because I found that the lower part of the lower intake gaskets are leaking. The bottom of both sides were wet and the intake track on the heads was wet with oil. If that was happening before that might be the cause of the light throttle miss I've had. This time I used silicone on the intake gaskets around all of the intake ports. I normally do that around the water jackets only but this time I did everything. I'm also letting it dry overnight. I did start it after letting it dry for about 3 hours but just so I could move the car.
|