Quote:
Originally Posted by TimAT
2.20 low close ratio- and it's not real easy on the clutch anyway with that 12lb flywheel. Other than the hassle of 973 bolts around that Lakewood scattershield the clutch is really pretty easy. Crossmember has been modded too BTW. 4 bolts and it's out.
|
3.08s is not going to work well with the Close Ratio. You are going to fry a clutch disk pretty fast. I've seen this and it's not pretty. 3.36 ( actually 3.55 is lowest I would use in the real world) is the lowest that I would even think of using with a 2.20 first gear.
But that's me.
You might want to think WIDE Ratio (2.52) on this. Trust me.
