I am using the MSD 6AL digital programmable box. Here's how it works....the Dist feeds the ECU which, then feeds the MSD 6AL. The ECU is not getting a signal from the distributor.
The way to check the distributor is two fold. ONe is resistance across the coil, which I get, the other is to check AC output of the dist, which should be 300-500 MV. Which it is.
I'm at a loss. Need to call ECU manufacturer. The car FIRES once in the while, rarely. If the MSD isn't giving the signal, nothing else works. Watching the ECU, I'm getting no reading on the RPM gauge. So it's not reading the Distributor.
|