Motorgen - Automotive Events, Meets, Cruises and Forums - View Single Post

enkeivette · 07-04-2010, 12:02 AM

Filled the hole, drilled it, tapped it (5/16). It works well, it is holding I'd guess 30ish ft lbs.

This was a stripped thread on the steering pin in my Berkeley jet.

07-04-2010, 12:02 AM	#1
enkeivette Super Moderator Join Date: Dec 2007 Posts: 6,850 Tweet	Repaired stripped thread with JB weld. Filled the hole, drilled it, tapped it (5/16). It works well, it is holding I'd guess 30ish ft lbs. This was a stripped thread on the steering pin in my Berkeley jet. __________________ I <3 forced induction.