Motorgen - Automotive Events, Meets, Cruises and Forums - View Single Post - Ported Strip Carter Mechanical Fuel Pump for a SBC

enkeivette · 05-02-2012, 04:58 PM

Took it apart and cleaned up all of the edges and bored out the openings and valve body with a dremel. I was modifying it for better flow when I found the deal on that Holley Ultra HP pump.

It was rated at 130gph, so now it should be a bit better. It's totally clean inside and out, you couldn't tell it was used. Only has probably 10K miles on it. Make me a reasonable offer and its yours.

05-02-2012, 04:58 PM	#1
enkeivette Super Moderator Join Date: Dec 2007 Posts: 6,850 Tweet	Ported Strip Carter Mechanical Fuel Pump for a SBC Took it apart and cleaned up all of the edges and bored out the openings and valve body with a dremel. I was modifying it for better flow when I found the deal on that Holley Ultra HP pump. It was rated at 130gph, so now it should be a bit better. It's totally clean inside and out, you couldn't tell it was used. Only has probably 10K miles on it. Make me a reasonable offer and its yours. __________________ I <3 forced induction.