|
|
|
01-06-2009, 05:40 PM
|
#1
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
RX-Snake: Axle and Drive Shaft
How much would a built 8.8" cost vs. a built 9"
How much torque/power can a built 8.8" hold vs. a 9"?
What is the approximate weight differential between the 8.8" 9"?
My practical side says go with a built 8.8". It will probably hold forever, be a bit smaller and lighter, and maybe be a bit cheaper.
My red neck side says 9 is bigger than 8.8 so do that.
__________________
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (active)
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (back burner)
|
|
|
01-06-2009, 11:16 PM
|
#2
|
Fast & Filthy
Join Date: Jun 2008
Posts: 3,840
|
Quote:
Originally Posted by Vettezuki
How much would a built 8.8" cost vs. a built 9"
How much torque/power can a built 8.8" hold vs. a 9"?
What is the approximate weight differential between the 8.8" 9"?
My practical side says go with a built 8.8". It will probably hold forever, be a bit smaller and lighter, and maybe be a bit cheaper.
My red neck side says 9 is bigger than 8.8 so do that.
|
The 8.8 can be just as strong as the 9" plus they are easier to get. Here is a great article that Chevy High Performance did comparring the 9" to a Chevy 12bolt (8.75") which is equal to the 8.8.
http://www.chevyhiperformance.com/te...son/index.html
|
|
|
01-06-2009, 11:57 PM
|
#3
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
Quote:
Originally Posted by 94cobra69ss396
|
Cool. What's your recommended source for an 8.8?
__________________
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (active)
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (back burner)
|
|
|
01-07-2009, 10:46 AM
|
#4
|
Fast & Filthy
Join Date: Jun 2008
Posts: 3,840
|
Quote:
Originally Posted by Vettezuki
Cool. What's your recommended source for an 8.8?
|
I thought we were going to run the Mazda rearend at first to see how it held up? If not, wait until I pick up the car and I'll measre the rear axle to see how wide it is. Then I can compare it to the Explorer and the Cobra to see if either would work without narrowing. If one of those is the right width we can just pull one from a wrecked car or truck. If they're both too wide I say we pull one from an Explorer and then narrow it.
What type of rear axle does the RX7 have under it now? Is it a solid axle or is it independent?
|
|
|
01-07-2009, 10:56 AM
|
#5
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
Quote:
Originally Posted by 94cobra69ss396
I thought we were going to run the Mazda rearend at first to see how it held up? If not, wait until I pick up the car and I'll measre the rear axle to see how wide it is. Then I can compare it to the Explorer and the Cobra to see if either would work without narrowing. If one of those is the right width we can just pull one from a wrecked car or truck. If they're both too wide I say we pull one from an Explorer and then narrow it.
What type of rear axle does the RX7 have under it now? Is it a solid axle or is it independent?
|
It's an IRS witha wee pumpkin and ity bity half shafts. I've heard the diffs from the Turbo II cars are pretty stout, but obviously the way a turbo rotary delivers power is completely different than a blown V8, but *maybe* that'd work. We'd at least have to beef up the half shafts in that scenario.
After looking at it more closely last night, with sticky tires, I'd expect total destruction in less than ten runs with the stock unit, if not the first one. I can post some pics later tonight.
__________________
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (active)
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (back burner)
|
|
|
01-07-2009, 11:01 AM
|
#6
|
Fast & Filthy
Join Date: Jun 2008
Posts: 3,840
|
If you want to measure it tonight and post it I'll measure the Explorer and Cobra. Measure from the wheel mounting surface. Otherwise I can do it when I have the car.
|
|
|
01-07-2009, 11:13 AM
|
#7
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
Quote:
Originally Posted by 94cobra69ss396
If you want to measure it tonight and post it I'll measure the Explorer and Cobra. Measure from the wheel mounting surface. Otherwise I can do it when I have the car.
|
Will do. I'm also going to do a little more research on Turbo II diffs and aftermarket half shafts to see what they can hold. There certainly have been JDM RX-7s that put out way more power than we will be, but it's super high revving turbo power, not blown displacement.
__________________
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (active)
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (back burner)
|
|
|
01-07-2009, 11:13 AM
|
#8
|
Resident Avatar Gambler
Join Date: Nov 2006
Posts: 5,997
|
Quote:
Originally Posted by Vettezuki
Cool. What's your recommended source for an 8.8?
|
There is an all Ford junkyard in Placentia. Maybe we could get it out of a wrecked Explorer there?
|
|
|
01-07-2009, 11:46 AM
|
#9
|
I, Vettezuki
Join Date: Feb 2006
Posts: 14,754
|
I'm doing some research with the V8RX7 boys. From what I've found so far, the stock NA unit is "designed for failure behind a V8". However, it seems the Turbo unit is pretty stout, and has a 4.1 ratio as we'd want. More to come. It'd be kind cool to keep the IRS because then we could use it for straight line and single lap AutoX type stuff just for shits and giggles. We'll see. I'd just like to avoid too many complex re-engineering efforts more than anything.
__________________
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen on To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (active)
Motorgen Project Car To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (back burner)
|
|
|
01-07-2009, 01:37 PM
|
#10
|
Power's off.
Join Date: Dec 2008
Posts: 673
|
I would be willing to bet, with the first popped clutch at 3,500RPM, that stock unit will grenade.
For straight line work, a 9" with a spool.............
Street car needs compromising on racing.
Autocross needs compromising on street and straight line.
Straight line needs....................well, you get it.
__________________
Chrome don't get you home.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|